Dryers filament 3D: Models recommended
This site is supported by its readers, and we may receive commissions if you purchase products through our links, at no additional cost to you. More information..
3D printing has revolutionized the way objects are created, however to get the best results, It is important to use high quality filaments and make sure they are completely dry. to get quality parts.
In this article I will present you the different recommended 3D filament dryers so that you can choose the best one for your needs.
Why is it important to dry 3D filaments?
3D printing filaments can absorb moisture from the environment and if they are printed with this humidity they can generate defects in the piece such as cracks, bubbles, deformations and poor adhesion between layers... (See more consequences)
If the filaments are not dried properly it can affect the quality of the print.
For this reason, It is essential that you store your filaments in a dry place protected from moisture. Here you can see How to store 3D printing filaments.
And if they have already absorbed moisture, you will need a 3D filament dryer to remove it and leave them in optimal condition.
Recommended models of 3D filament dryers
If you are looking for a 3D filament dryer, there are several recommended models available on the market. Below are some recommended 3D filament dryer models:
Sunlu S1
This Sunlu S1 hot air dryer is suitable for drying PLA filaments. It has a capacity of 1 kg and its temperature is adjustable up to 55 degrees Celsius. In addition, it has an LCD screen and a timer to program the drying time.
- Maximum capacity: 210 x 85 mm
- Maximum temperature: 55 °C
- Has scale: No
- Screen: 2″
The Sunlu S1 is considered by many to be the best 3D filament dryer due to its price/quality ratio. It is one of the most economical dryers and offers very good drying quality, especially for PLA.
This model is very easy to use and you can buy it on Amazon: SUNLU S1 3D Filament Dryer Box
Sunlu S2
The SUNLU S2 is another hot air dryer from the SUNLU brand but with a higher temperature range. It is ideal for printing large parts and its temperature is adjustable between 35 and 70 degrees Celsius. It has an LCD screen and a timer to program the drying time.
- Maximum capacity: 210 x 85 mm
- Maximum temperature: 70 °C
- Has scale: No
- Screen: 6.4″ Touch Screen
The Sunlu S2 reaches a maximum temperature of 70 degrees, making it ideal for drying PETG filament in fewer hours (than the Sunlu S1)
This model can also be purchased on Amazon: SUNLU S2 Filament Dryer
eSUN eBOX
It has a capacity of 1 kg and a maximum drying time of 18 hours. It has an LCD screen and a timer to program the drying time.
This model is very easy to use and can be purchased on Amazon: Ebox Lite 3D Filament Dryer Box
- Maximum capacity: 200 x 73 mm
- Maximum temperature: 80 °C
- Does it have a scale: yes
- Screen: 2″
You can also download its user manual from here.
Sovol SH01
The Sovol SH01 is a hot air filament dryer with a capacity of up to 1 kg of filament. This model features an LCD screen to adjust the temperature and drying time, as well as an overheating protection system and a temperature sensor for added safety.
The Sovol SH01 is compatible with most 3D filaments including PLA, ABS, PETG, TPU and Nylon. Its compact and portable design makes it easy to store and carry.
Drying time varies depending on filament type and humidity, but on average it takes between 6 to 12 hours. The Sovol SH01 is an excellent choice for those looking for a high-quality filament dryer at an affordable price.
- Maximum capacity: 2 rolls less than 70mm wide or 1 roll less than 150mm wide
- Maximum temperature: 50 °C
- Has scale: No
- Screen: 2″
See prices on Amazon: Sovol 3D Filament Dryer Box
FIXDRY Filament Dryer
The FIXDRY Filament Dryer is a hot air dryer with a capacity of 1kg of filament. Its temperature is adjustable between 35 and 70 degrees Celsius and can be set for up to 48 hours to dry the filaments. It features an LED display and a timer to program the drying time. In addition, it has an overheating protection function and an alert system in case of failure.
- Maximum capacity: 2 rolls up to 217 x 80 mm
- Maximum temperature: 70 °C
- Has scale: No
- Screen: 2″
This model can also be purchased on Amazon: FIXDRY Filament Dryer 3D Filament Dryer
Catalog of the best-selling 3D filament dryers
These are the best-selling 3D filament dryers. Click on them to learn more about their features or read reviews. of the users.
Tips for drying 3D filaments
Regardless of the type of 3D filament dryer you choose, there are a few tips you should follow to ensure your filaments are completely dry:
- Store your filaments in a cool, dry place to prevent them from absorbing moisture.
- If your filament is already wet, let it dry for at least 24 hours before using it.
- Before printing, make sure your filament is completely dry. This will help prevent imperfections during printing.
- Use a 3D filament dryer to ensure your filaments are completely dry before printing.
- Remember that most dryers will have a fan to circulate the air and this may make some noise.
- If you don't have access to a 3D filament dryer, you can use a conventional oven to dry your filaments. However, be aware that this may damage your filaments.
Conclusions:
3D filament dryers are an essential tool for any 3D printer, as they allow you to dry your filaments and avoid problems such as nozzle clogging, filament cracking and poor layer adhesion.
Hot air, vacuum and silica gel dryers are the most common options on the market and offer different benefits and features.
It is important to choose the right model for your needs and make sure to store your filaments in vacuum bags or silica gel to protect them from moisture.
The choice should be made based on the type of filament used. If you only use PLA your best option (for its quality-price ratio) It will be the Sunlu S1 dryer.
If you use other types of filaments such as ABS, PETG or even Nylon, your best option will be a dryer like the Sunlu S2 or the Esun Ebox. since they have a greater temperature range and you will be able to dry the filaments in fewer hours.
Frequently asked questions (FAQs)
- Why is it important to dry 3D filaments?
It is important to dry 3D filaments to avoid problems such as nozzle clogging, filament cracking, and poor layer adhesion. Filaments can absorb moisture from the environment, which affects their quality and physical properties.
- What type of filament dryer should I choose?
Choose a filament dryer to dry already wet filaments and vacuum bags with silica gel sachets to store them and prevent them from absorbing moisture again.
- Can I use a conventional oven to dry my filaments?
Yes, you can use a conventional oven to dry your filaments, but be aware that this may damage some types of filaments.
- How do I know if my filaments are wet?
You can tell if your filaments are wet by seeing if they have bubbles on the surface or if they make a crackling sound when printing.
- How can I store my filaments properly?
It is recommended to store the filaments in a cool, dry place, away from direct sunlight and moisture. You can use vacuum bags or silica gel to protect your filaments from moisture. (See here)
The temperature of the eSun ebox according to the article is 80° and on the amazon page it marks 55°.
Hello Dani!
The 80°C that the publication marks are from the heating plate at Level 4, which would be the level to dry Nylon and PC.
According to the table in the Manual, at this level the internal temperature is 50°C. I guess that's the temperature that really matters, and the one they put on Amazon.
Thanks for your notice.
Greetings and much success in your projects!