How to change the size of the nozzle in Cura
To change the size of the nozzle in Cura you must go to the top menu, where the type of filament you are using is listed and click on the...
How to calibrate the flow of your 3D printer to obtain more exact parts.
What Is Flow in 3D Printing? Flow is a setting in the slicer software that allows you to adjust, via software,…
Best Cura setups for beginners
The best Cura settings will allow you to make better 3D prints with fewer errors and a better time/quality ratio. Ultimaker Cura is an application...
How to correctly change the nozzle of your 3D printer
To correctly change the nozzle of your 3D printer you must heat the Hotend to 200 °C, remove the filament you have completely and then...
How to calibrate the steps of the extruder
You have probably heard about calibrating the extruder pitches, this is a crucial task that will allow you to obtain accurate and high quality prints.....
Scroll settings in Cura
Hello! In this article, you will read about the different displacement settings in Cura. We will explore options such as retraction, combed mode and other...
What is Warping in 3D printing?
Warping, also known as deformation or bending, is a common problem that can occur during the 3D printing process. It consists of the...
No filament coming out of the extruder
The extrusion system is one of the most important parts of our printer, since it is in charge of moving the filament with the help of...
Upper and lower layers, in Cura
The configuration of the top and bottom layers in 3D printing is essential to obtain a high quality part. In this article, we will...
What to know before buying a 3D printer
Si estás pensando en comprar una impresora 3D hay algunas cosas que deberías saber antes. Saberlas con anticipación te ayudarán a elegir mejor y tener…