Creality Falcon 2 Laser Engraver with Air Assist Kit, 22W Laser Engraving Machine 25000mm/min Wood Engraver Cutter for Metals, Leather, Wood, Engraving Area 415×400 mm

Descripción

This site is supported by its readers, and we may receive commissions if you purchase products through our links, at no additional cost to you. More information..

22W Optical Power: Creality Falcon 2 adopts FAC dot compression technology, through the spatial combination of 4 powerful 6W laser diodes, the laser power is increased to 22W. It can cut 12mm wood at the same time, 8mm black acrylic at the same time. Compared with Creality CR-Laser Falcon 10W engraving machine, the cutting speed is increased by 200%, and the engraving speed is increased by 100%. Note: Not equipped with honeycomb laser
Built-in Air Assist: Creality Falcon 2 is equipped with air assist kit, the built-in manual and automatic air assist can not only be manually controlled via the knob, but also can control the aspect flow via Lightburn software. It drives away smoke and dust during the engraving process, protects the laser head lens, and makes the cutting clean and smooth, to keep the working margin clean.
Triple monitoring system: (1). Aspect flow monitoring (2). Flame monitoring: When the machine detects a flame, the status display light on the fuselage will flash red to give an alarm and immediately stop in an emergency. (3). Lens dirt monitoring: When the lens dirt reaches a certain level, it will trigger an alarm to dose lens breakage and frequent replacement.
Safe to Use: Creality Falcon 2 adds a child lock design to dose children from accidentally touching the operation. Two-way Limit Switch: If the machine runs beyond the limit, the machine will automatically stop and give a buzzer alarm. When the machine is working, if it tilts, overturns or falls, the machine will stop working immediately and will sound and light an alarm at the same time.
Wide Compatibility: Creality Falcon 2 is compatible with various mature engraving software, such as Lasergrbl, Lightburn, Support Win XP/Win 7/Win 8/XP/Win 10, and also support System Mac(Lightburn), the engraved file format is NC, BMP, JPG, PNG, DXF etc. We provide 12 months for it. If you have any questions, please feel free to contact us.