{"id":12472,"date":"2023-08-01T19:27:19","date_gmt":"2023-08-01T22:27:19","guid":{"rendered":"https:\/\/impresion3d.website\/?p=12472"},"modified":"2023-08-01T19:27:24","modified_gmt":"2023-08-01T22:27:24","slug":"what-to-do-after-3d-printing","status":"publish","type":"post","link":"https:\/\/impresion3d.website\/en\/what-to-do-after-3d-printing\/","title":{"rendered":"What to Do After 3D Printing?"},"content":{"rendered":"

After 3D printing, it's essential to wait for about 5 minutes to let the resin drain, carefully separate the piece from the print plate, and clean both the plate and the printed parts. Next, remove any supports and cure the pieces with UV light. It's also crucial to empty any unused resin from the printer's tank and clean it properly for the next printing.<\/strong><\/p>\n\n\n\n

After successfully completing a 3D print, following a series of steps is vital to ensure the printed piece achieves the best possible quality and prevent future issues.<\/p>\n\n\n\n

The procedures may vary depending on the type of 3D printer used<\/strong>: FDM (Fused Deposition Modeling) or resin printers. <\/p>\n\n\n\n

In this article, we'll explore what to do after 3D printing for both cases, ensuring your printed models have a professional and durable finish.<\/p>\n\n\n\n

What to Do After 3D Printing with FDM Printers:<\/h2>\n\n\n\n

1. Separating the Piece from the Print Bed:<\/h3>\n\n\n\n

Once the printing is complete, it's crucial to let the piece cool for about 5-10 minutes<\/strong> before separating it from the print bed. This ensures that the piece is below the softening temperature and prevents deformations. <\/p>\n\n\n\n

Carefully use a spatula or appropriate tool to lift the edges of the piece and gently detach it from the print bed.<\/p>\n\n\n\n

2. Cleaning the Nozzle:<\/h3>\n\n\n\n

Cleaning the printer's nozzle after each print is recommended. <\/p>\n\n\n\n

Use a dry cloth to wipe away any residue or filament that may have adhered to the nozzle. <\/strong><\/p>\n\n\n\n

This helps maintain the nozzle in good condition and prevents clogs in future prints.<\/p>\n\n\n\n

Here you can see a complete post on how How to clean the 3D printer nozzle<\/a>.<\/p>\n\n\n\n

3. Cleaning the Print Bed:<\/h3>\n\n\n\n

Before starting a new print, it's essential to clean the print bed of any residue or adhesive. <\/p>\n\n\n\n

Use isopropyl alcohol and a clean cloth to wipe the bed's surface, ensuring it is free from dust and grease.<\/strong><\/p>\n\n\n

\n
\"What
A clean bed surface ensures good adhesion of the new model and prevents adhesion problems.<\/figcaption><\/figure>\n<\/div>\n\n\n

4. Removing and Storing the Filament:<\/h3>\n\n\n\n

After printing, carefully remove the used filament from the printer to prevent moisture and dust from accumulating on the roll. <\/p>\n\n\n\n

If you won't be printing again soon, it's advisable to store the filament in an airtight bag with a desiccant packet to keep it dry and in optimal condition. store the filament<\/a> in an airtight bag with a desiccant packet to keep it dry and in top condition.<\/strong><\/p>\n\n\n\n

If you did not know it, moisture buildup on the filaments can cause big problems<\/strong>. Here is a post that may interest you: Moisture in 3D printing filaments: Main consequences<\/a><\/p>\n\n\n\n

5. Visual Check and Dimension Verification:<\/h3>\n\n\n\n

Before considering the print complete, visually inspect the printed model<\/strong> for any imperfections, layer issues, or print failures. <\/p>\n\n\n\n

Additionally, verify the model's dimensions<\/strong> against the original specifications to ensure precise printing.<\/p>\n\n\n\n

6. Removing Supports and Excess Filament:<\/h3>\n\n\n\n

If the printed model requires supports, carefully remove them using pliers or suitable tools. Then, cut off any excess filament or small imperfections with scissors or a cutter, ensuring a clean and professional finish.<\/p>\n\n\n\n

7. Performing Post-Processing:<\/h3>\n\n\n\n

Post-processing involves applying various techniques to improve the printed model's aesthetic and functional finish. <\/p>\n\n\n\n

Depending on the material used, this may include sanding, painting, varnishing, or applying resins, among others.<\/p>\n\n\n\n

What to do after a resin 3D print?<\/h2>\n\n\n\n

1. Allowing Resin to Drain:<\/h3>\n\n\n\n

After completing a print on a resin printer, the printed piece will be immersed in liquid resin. <\/p>\n\n\n\n

It's essential to allow it to drain for a few minutes to remove excess resin, reducing curing time and preventing unnecessary material buildup.<\/strong><\/p>\n\n\n\n

Youtube channel: Your 3D Key<\/a><\/p>\n\n\n\n