{"id":656,"date":"2021-08-29T20:48:27","date_gmt":"2021-08-29T23:48:27","guid":{"rendered":"https:\/\/impresion3d.website\/?p=656"},"modified":"2023-09-04T14:40:53","modified_gmt":"2023-09-04T17:40:53","slug":"no-filament-comes-out-of-the-extruder","status":"publish","type":"post","link":"https:\/\/impresion3d.website\/en\/no-filament-comes-out-of-the-extruder\/","title":{"rendered":"No filament coming out of the extruder"},"content":{"rendered":"

The extrusion system is one of the most important parts of our printer, since it is responsible for moving the filament with the help of a toothed wheel through a Teflon tube, taking the filament to the Hotend where it is melted and deposited<\/strong>.<\/p>\n\n\n\n

When no filament comes out of the extruder it means that something is wrong and we need to fix it<\/strong>.<\/p>\n\n\n\n

here they go 8 reasons why filament does not come out of the extruder<\/strong>.<\/p>\n\n\n\n

1. Filament ran out or cut<\/h2>\n\n\n\n

If no filament comes out of the extruder it may be that the filament has run out, has dried up and for that reason has been cut<\/strong>.<\/p>\n\n\n\n

One of the reasons why the PLA filament can be cut is humidity, I invite you to read about it here<\/a>.<\/p>\n\n\n\n

Solution<\/strong><\/span>:<\/p>\n\n\n\n

The solution is to heat the nozzle to remove the remaining filament and put the new filament.<\/strong><\/p>\n\n\n

\n
\"No
Filament ran out or cut<\/figcaption><\/figure>\n<\/div>\n\n\n

2. The filament in the nozzle melted<\/h2>\n\n\n\n

Many printers when preheating melt the filament<\/strong> and when starting the print, filament does not come out of the nozzle<\/strong>, sometimes leaving a deformed or incomplete first layer.<\/p>\n\n\n\n

Solutions<\/strong><\/span>:<\/p>\n\n\n\n

Manually feed the filament<\/h3>\n\n\n\n

The first solution is to manually feed the filament to verify that really comes out<\/span> through the mouthpiece <\/p>\n\n\n\n

Depending on the type of printer you have, you can print a wheel<\/a> to rotate the nema motor, or manually by squeezing the extruder arm and pushing the filament with your hands.<\/p>\n\n\n

\n
\"No
Use wheel to push the filament<\/figcaption><\/figure>\n<\/div>\n\n\n
\n\n\n\n

Enable the Skirt option<\/h3>\n\n\n\n

One way to ensure that the filament exits the extruder in the first layer is to enable the Skirt option<\/strong> in our preferred Laminator or Slicer.<\/p>\n\n\n\n

This option will allow the printer to make a certain number of turns around the model before starting to print the first layer.<\/p>\n\n\n\n

This will give enough time for the extruder to feed the necessary filament and start extruding it on the heated bed.<\/p>\n\n\n

\n
\"Activate
Activate Skirt in Cura<\/figcaption><\/figure>\n<\/div>\n\n\n

I invite you to read: Skirt Border or Balsa, which one to use in Cura?<\/a><\/p>\n\n\n\n

\n\n\n\n

3. Nozzle too close to the bed<\/h2>\n\n\n\n

Sometimes the nozzle is too close, even touching the base. This prevents the plastic from coming out normally, causing errors in the first layer.<\/p>\n\n\n\n

Solutions:<\/span><\/strong><\/p>\n\n\n\n

level the bed<\/h3>\n\n\n\n

One of the most recurring mistakes made by beginners is that of not having leveled the printer bed<\/strong>.<\/p>\n\n\n\n

Leveling the printer bed is VITAL<\/strong> to have good impressions, since not doing so can cause other types of errors that will affect the quality of our work.<\/p>\n\n\n\n

One of the consequences of not having leveled the bed is having the nozzle too close to the base<\/strong>, not allowing the filament to come out correctly in all areas.<\/p>\n\n\n\n

LEVEL THE BED<\/a> and you will see the results<\/p>\n\n\n\n

Modify the initial layer height<\/h3>\n\n\n\n

In the laminator or slicer you are going to place an initial layer height of 0.2mm<\/strong> to ensure that the filament can exit the hotend correctly.<\/p>\n\n\n\n

Print the first layer at a lower height than that will cause errors<\/span>, such as the excess of filament coming out of the sides of the nozzle, or the lack of filament added to that horrible sound of the extruder skipping steps like the so famous "tac tac tac"<\/strong><\/p>\n\n\n

\n
\"First
First layer in Cura<\/figcaption><\/figure>\n<\/div>\n\n\n
\n\n\n\n

4. Clogged nozzle<\/h2>\n\n\n\n

Cheap and poor quality filaments that are not quality tested by their manufacturers can fall within their tolerances, whether in their diameter, hardness, slower melting time.<\/p>\n\n\n\n

This can cause clogging inside the nozzle<\/strong>, not allowing the filament to come out.<\/p>\n\n\n\n

Solution:<\/span><\/strong><\/p>\n\n\n\n

heat the hotend at the temperature that corresponds to the filament in use<\/strong>, even about 10 degrees more and insert a needle to uncover it.<\/p>\n\n\n

\n
\"No
Unclog 3D printing needle nozzle<\/figcaption><\/figure>\n<\/div>\n\n\n

I invite you to read: How to clean the 3D printer nozzle<\/a><\/p>\n\n\n\n

\n\n\n\n

5. Damaged extruder<\/h2>\n\n\n\n

If at this point you already have filament, you have leveled the print bed well, you do not have any obstructions and still the extruder does not push filament<\/strong>, then there is a problem with the extrusion system.<\/strong><\/p>\n\n\n\n

The extrusion system can cause many problems if your 3D printer is cheap and made of cheap materials, as is the case with the Ender 3 from Creality.<\/p>\n\n\n\n

This was the case in my case, since little by little all those parts of the extrusion system that were made of plastic and of very poor quality began to break. Let's see what those parts are and how to fix it.<\/p>\n\n\n\n

Broken extruder arm<\/strong><\/h3>\n\n\n
\n
\"No
Broken extruder or broken arm<\/figcaption><\/figure>\n<\/div>\n\n\n
\n\n\n\n

It is one of the most frequent extrusion failures and closely related to low-cost printers with a bowden tube system such as the Ender 3.<\/p>\n\n\n\n

The original extruder on some machines is plastic and at some point it breaks or fails in some way.<\/p>\n\n\n\n

Solution:<\/span><\/strong><\/p>\n\n\n\n

You will need to buy a new extruder<\/strong>, preferably metal or aluminum. It is a vital part of the extrusion system and must never fail.<\/strong><\/p>\n\n\n\n

<\/p>\n\n\n

\n
\"Aluminum
Aluminum 3D Printer Extruder<\/a><\/figcaption><\/figure>\n<\/div>\n\n\n

I recommend this aluminum extruder<\/a> on amazon you have double sprockets<\/span> for better filament push.<\/p>\n\n\n\n

\n\n\n\n

Loose or too tight screws<\/strong><\/h3>\n\n\n\n

In some occasions the screws of the extruder arm will be too tight<\/strong> either too loose<\/strong>s, preventing the spring from doing its job correctly.<\/p>\n\n\n\n

If there is no filament coming out of the extruder, it is because the extruder arm is not levering the sprocket correctly.<\/p>\n\n\n\n

For the extruder to work well, the arm you will need to tighten the filament with the toothed wheel<\/strong>.<\/p>\n\n\n\n

Solution<\/span><\/strong>:<\/p>\n\n\n\n

Tighten or loosen the screws (whatever is necessary) so that the filament is pressed against the sprocket of the nema motor and can easily enter the Bowden tube.<\/strong><\/p>\n\n\n

\n
\"Adjusting
Adjust the extruder of the 3d printer<\/figcaption><\/figure>\n<\/div>\n\n\n
\n\n\n\n

6. Dirty or broken sprocket<\/h2>\n\n\n\n

The cogwheel<\/strong> It is in charge of pushing the filament through the bowden tube. A dirty sprocket<\/strong> will cause the motor steps to be lost and the filament not to reach the hotend properly, causing problems sub extrusion<\/strong>.<\/p>\n\n\n\n

Solution<\/span>:<\/strong><\/p>\n\n\n\n

Always keep the sprocket clean. If necessary, replace it with a new one.<\/p>\n\n\n

\n
\"Dirty
Extruder does not push ender 3 filament<\/figcaption><\/figure>\n<\/div>\n\n\n

7. Damaged pneumatic couplings<\/h2>\n\n\n\n

Another type of recurring failure in printers with a bowden-type extrusion system are broken pneumatic couplings. These couplings are in charge of keeping the extruder and the hotend fixed, the tubes through which the filaments travel.<\/p>\n\n\n\n

When these couplings are of poor quality, they break or distort, causing the bowden tubes to move outwards when the filament enters.<\/p>\n\n\n\n

The filament does not come out of the extruder, causing under-extrusion failure, or missing filament.<\/p>\n\n\n\n

Solution<\/span><\/strong>:<\/p>\n\n\n\n

Any Racor coupling that has failed, must necessarily be exchanged for a higher quality one<\/strong>.<\/p>\n\n\n\n

For example<\/span>: the Ender 3 printer uses in the extruder a M6 Racor coupling for a 4 mm Teflon tube<\/strong> and in the Hotend use a 3\/8 through fitting coupling for 4 mm Teflon tube<\/strong>.<\/p>\n\n\n

\n
\"Broken
Broken pneumatic coupler, bowden tube coming loose.<\/figcaption><\/figure>\n<\/div>\n\n\n

Here you can see an offer on Amazon for the two couplings that the extruder has: PC4-M10\/PC4-M6 Pneumatic Connectors<\/a><\/p>\n\n\n\n

\n\n\n\n

8. Teflon tube burned<\/h2>\n\n\n\n

Another reason why the filament does not come out of the extruder in the 3D printer, or rather from the hot nozzle (hotend), is that the Teflon tube is burned. <\/p>\n\n\n\n

The type of printer you have will depend on this, but it is more common than you think and reason for most sub extrusion problems<\/strong>.<\/p>\n\n\n\n

One of the reasons for this to happen is that the same hot filament burn teflon tube<\/strong> and obstruct its outlet.<\/p>\n\n\n\n

The causes may be due to a manual filament retraction<\/strong>, while it is at high temperatures, from 210 \u00b0C to above 260 \u00b0C<\/p>\n\n\n\n

I leave you one Capricorn brand Ptfe Bowden Tube offer<\/a> which includes 4 pneumatic couplings, 4 springs for the print bed, 1 meter of Capricorn tube with 1 tube cutter on Amazon<\/p>\n\n\n\n

No filament coming out of the extruder:<\/h2>\n\n\n\n

Summary<\/span>:<\/p>\n\n\n\n

    \n
  1. Filament ran out or cut.<\/li>\n\n\n\n
  2. The filament in the nozzle melted.<\/li>\n\n\n\n
  3. Nozzle too close to bed.<\/li>\n\n\n\n
  4. Clogged nozzle.<\/li>\n\n\n\n
  5. Damaged extruder.<\/li>\n\n\n\n
  6. Dirty or broken sprocket.<\/li>\n\n\n\n
  7. Damaged fittings.<\/li>\n\n\n\n
  8. Teflon tube burnt.<\/li>\n<\/ol>\n\n\n\n
    \n\n\n\n

    Good luck with your projects and thank you very much for your visit<\/strong>.<\/p>","protected":false},"excerpt":{"rendered":"

    The extrusion system is one of the most important parts of our printer, since it is in charge of moving the filament with the help of...<\/p>","protected":false},"author":1,"featured_media":672,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[11],"tags":[],"class_list":["post-656","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-errores-fallas-y-soluciones",""],"gutentor_comment":0,"yoast_head":"\nImpresion3d.website<\/title>\n<meta name=\"description\" content=\"Cuando no sale filamento por el extrusor significa que algo no est\u00e1 bien y deberemos solucionarlo. No sale filamento por el extrusor %\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/impresion3d.website\/en\/no-filament-comes-out-of-the-extruder\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"No sale filamento por el extrusor Fallas y soluciones\" \/>\n<meta property=\"og:description\" content=\"Cuando no sale filamento por el extrusor significa que algo no est\u00e1 bien y deberemos solucionarlo. No sale filamento por el extrusor %\" \/>\n<meta property=\"og:url\" content=\"https:\/\/impresion3d.website\/en\/no-filament-comes-out-of-the-extruder\/\" \/>\n<meta property=\"og:site_name\" content=\"Impresion3d.website\" \/>\n<meta property=\"article:published_time\" content=\"2021-08-29T23:48:27+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2023-09-04T17:40:53+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/impresion3d.website\/wp-content\/uploads\/2021\/08\/No-sale-filamento-por-el-extrusor-portada-impresion3d.website.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"800\" \/>\n\t<meta property=\"og:image:height\" content=\"445\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"Dar\u00edo\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Dar\u00edo\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"9 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/impresion3d.website\\\/no-sale-filamento-por-el-extrusor\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/impresion3d.website\\\/no-sale-filamento-por-el-extrusor\\\/\"},\"author\":{\"name\":\"Dar\u00edo\",\"@id\":\"https:\\\/\\\/impresion3d.website\\\/#\\\/schema\\\/person\\\/86832f5d1e89f7083a5cda59007d703e\"},\"headline\":\"No sale filamento por el extrusor\",\"datePublished\":\"2021-08-29T23:48:27+00:00\",\"dateModified\":\"2023-09-04T17:40:53+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/impresion3d.website\\\/no-sale-filamento-por-el-extrusor\\\/\"},\"wordCount\":1468,\"commentCount\":2,\"publisher\":{\"@id\":\"https:\\\/\\\/impresion3d.website\\\/#\\\/schema\\\/person\\\/86832f5d1e89f7083a5cda59007d703e\"},\"image\":{\"@id\":\"https:\\\/\\\/impresion3d.website\\\/no-sale-filamento-por-el-extrusor\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/impresion3d.website\\\/wp-content\\\/uploads\\\/2021\\\/08\\\/No-sale-filamento-por-el-extrusor-portada-impresion3d.website.jpg\",\"articleSection\":[\"Fallas y soluciones\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/impresion3d.website\\\/no-sale-filamento-por-el-extrusor\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/impresion3d.website\\\/no-sale-filamento-por-el-extrusor\\\/\",\"url\":\"https:\\\/\\\/impresion3d.website\\\/no-sale-filamento-por-el-extrusor\\\/\",\"name\":\"No sale filamento por el extrusor Fallas y soluciones\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/impresion3d.website\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/impresion3d.website\\\/no-sale-filamento-por-el-extrusor\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/impresion3d.website\\\/no-sale-filamento-por-el-extrusor\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/impresion3d.website\\\/wp-content\\\/uploads\\\/2021\\\/08\\\/No-sale-filamento-por-el-extrusor-portada-impresion3d.website.jpg\",\"datePublished\":\"2021-08-29T23:48:27+00:00\",\"dateModified\":\"2023-09-04T17:40:53+00:00\",\"description\":\"Cuando no sale filamento por el extrusor significa que algo no est\u00e1 bien y deberemos solucionarlo. No sale filamento por el extrusor %\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/impresion3d.website\\\/no-sale-filamento-por-el-extrusor\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/impresion3d.website\\\/no-sale-filamento-por-el-extrusor\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/impresion3d.website\\\/no-sale-filamento-por-el-extrusor\\\/#primaryimage\",\"url\":\"https:\\\/\\\/impresion3d.website\\\/wp-content\\\/uploads\\\/2021\\\/08\\\/No-sale-filamento-por-el-extrusor-portada-impresion3d.website.jpg\",\"contentUrl\":\"https:\\\/\\\/impresion3d.website\\\/wp-content\\\/uploads\\\/2021\\\/08\\\/No-sale-filamento-por-el-extrusor-portada-impresion3d.website.jpg\",\"width\":800,\"height\":445,\"caption\":\"No sale filamento por el extrusor\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/impresion3d.website\\\/no-sale-filamento-por-el-extrusor\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Portada\",\"item\":\"https:\\\/\\\/impresion3d.website\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"No sale filamento por el extrusor\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/impresion3d.website\\\/#website\",\"url\":\"https:\\\/\\\/impresion3d.website\\\/\",\"name\":\"Impresion3d.website\",\"description\":\"Tu comunidad de Impresi\u00f3n 3D\",\"publisher\":{\"@id\":\"https:\\\/\\\/impresion3d.website\\\/#\\\/schema\\\/person\\\/86832f5d1e89f7083a5cda59007d703e\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/impresion3d.website\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":[\"Person\",\"Organization\"],\"@id\":\"https:\\\/\\\/impresion3d.website\\\/#\\\/schema\\\/person\\\/86832f5d1e89f7083a5cda59007d703e\",\"name\":\"Dar\u00edo\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/impresion3d.website\\\/wp-content\\\/uploads\\\/2023\\\/10\\\/LOGO-IMPRESION3D.WEBSITE-BOLD.png\",\"url\":\"https:\\\/\\\/impresion3d.website\\\/wp-content\\\/uploads\\\/2023\\\/10\\\/LOGO-IMPRESION3D.WEBSITE-BOLD.png\",\"contentUrl\":\"https:\\\/\\\/impresion3d.website\\\/wp-content\\\/uploads\\\/2023\\\/10\\\/LOGO-IMPRESION3D.WEBSITE-BOLD.png\",\"width\":400,\"height\":146,\"caption\":\"Dar\u00edo\"},\"logo\":{\"@id\":\"https:\\\/\\\/impresion3d.website\\\/wp-content\\\/uploads\\\/2023\\\/10\\\/LOGO-IMPRESION3D.WEBSITE-BOLD.png\"},\"description\":\"Sue\u00f1o con un mundo mejor, m\u00e1s sano donde todos seamos libres. Me gusta aprender, el blogging y la impresion 3D. Espero con este Blog poder hacer un aporte a la comunidad y crecer junto a ustedes en este hermoso mundo de la impresi\u00f3n 3D.\",\"sameAs\":[\"http:\\\/\\\/impresion3d.website\"],\"url\":\"https:\\\/\\\/impresion3d.website\\\/en\\\/author\\\/cvenencia\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Impresion3d.website","description":"When no filament comes out of the extruder it means that something is not right and we must fix it. No filament comes out of the extruder %","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/impresion3d.website\/en\/no-filament-comes-out-of-the-extruder\/","og_locale":"en_US","og_type":"article","og_title":"No sale filamento por el extrusor Fallas y soluciones","og_description":"Cuando no sale filamento por el extrusor significa que algo no est\u00e1 bien y deberemos solucionarlo. No sale filamento por el extrusor %","og_url":"https:\/\/impresion3d.website\/en\/no-filament-comes-out-of-the-extruder\/","og_site_name":"Impresion3d.website","article_published_time":"2021-08-29T23:48:27+00:00","article_modified_time":"2023-09-04T17:40:53+00:00","og_image":[{"width":800,"height":445,"url":"https:\/\/impresion3d.website\/wp-content\/uploads\/2021\/08\/No-sale-filamento-por-el-extrusor-portada-impresion3d.website.jpg","type":"image\/jpeg"}],"author":"Dar\u00edo","twitter_card":"summary_large_image","twitter_misc":{"Written by":"Dar\u00edo","Est. reading time":"9 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/impresion3d.website\/no-sale-filamento-por-el-extrusor\/#article","isPartOf":{"@id":"https:\/\/impresion3d.website\/no-sale-filamento-por-el-extrusor\/"},"author":{"name":"Dar\u00edo","@id":"https:\/\/impresion3d.website\/#\/schema\/person\/86832f5d1e89f7083a5cda59007d703e"},"headline":"No sale filamento por el extrusor","datePublished":"2021-08-29T23:48:27+00:00","dateModified":"2023-09-04T17:40:53+00:00","mainEntityOfPage":{"@id":"https:\/\/impresion3d.website\/no-sale-filamento-por-el-extrusor\/"},"wordCount":1468,"commentCount":2,"publisher":{"@id":"https:\/\/impresion3d.website\/#\/schema\/person\/86832f5d1e89f7083a5cda59007d703e"},"image":{"@id":"https:\/\/impresion3d.website\/no-sale-filamento-por-el-extrusor\/#primaryimage"},"thumbnailUrl":"https:\/\/impresion3d.website\/wp-content\/uploads\/2021\/08\/No-sale-filamento-por-el-extrusor-portada-impresion3d.website.jpg","articleSection":["Fallas y soluciones"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/impresion3d.website\/no-sale-filamento-por-el-extrusor\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/impresion3d.website\/no-sale-filamento-por-el-extrusor\/","url":"https:\/\/impresion3d.website\/no-sale-filamento-por-el-extrusor\/","name":"Filament does not come out of the extruder Faults and solutions","isPartOf":{"@id":"https:\/\/impresion3d.website\/#website"},"primaryImageOfPage":{"@id":"https:\/\/impresion3d.website\/no-sale-filamento-por-el-extrusor\/#primaryimage"},"image":{"@id":"https:\/\/impresion3d.website\/no-sale-filamento-por-el-extrusor\/#primaryimage"},"thumbnailUrl":"https:\/\/impresion3d.website\/wp-content\/uploads\/2021\/08\/No-sale-filamento-por-el-extrusor-portada-impresion3d.website.jpg","datePublished":"2021-08-29T23:48:27+00:00","dateModified":"2023-09-04T17:40:53+00:00","description":"When no filament comes out of the extruder it means that something is not right and we must fix it. No filament comes out of the extruder %","breadcrumb":{"@id":"https:\/\/impresion3d.website\/no-sale-filamento-por-el-extrusor\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/impresion3d.website\/no-sale-filamento-por-el-extrusor\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/impresion3d.website\/no-sale-filamento-por-el-extrusor\/#primaryimage","url":"https:\/\/impresion3d.website\/wp-content\/uploads\/2021\/08\/No-sale-filamento-por-el-extrusor-portada-impresion3d.website.jpg","contentUrl":"https:\/\/impresion3d.website\/wp-content\/uploads\/2021\/08\/No-sale-filamento-por-el-extrusor-portada-impresion3d.website.jpg","width":800,"height":445,"caption":"No sale filamento por el extrusor"},{"@type":"BreadcrumbList","@id":"https:\/\/impresion3d.website\/no-sale-filamento-por-el-extrusor\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Portada","item":"https:\/\/impresion3d.website\/"},{"@type":"ListItem","position":2,"name":"No sale filamento por el extrusor"}]},{"@type":"WebSite","@id":"https:\/\/impresion3d.website\/#website","url":"https:\/\/impresion3d.website\/","name":"Impresion3d.website","description":"Your 3D Printing Community","publisher":{"@id":"https:\/\/impresion3d.website\/#\/schema\/person\/86832f5d1e89f7083a5cda59007d703e"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/impresion3d.website\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":["Person","Organization"],"@id":"https:\/\/impresion3d.website\/#\/schema\/person\/86832f5d1e89f7083a5cda59007d703e","name":"Dario","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/impresion3d.website\/wp-content\/uploads\/2023\/10\/LOGO-IMPRESION3D.WEBSITE-BOLD.png","url":"https:\/\/impresion3d.website\/wp-content\/uploads\/2023\/10\/LOGO-IMPRESION3D.WEBSITE-BOLD.png","contentUrl":"https:\/\/impresion3d.website\/wp-content\/uploads\/2023\/10\/LOGO-IMPRESION3D.WEBSITE-BOLD.png","width":400,"height":146,"caption":"Dar\u00edo"},"logo":{"@id":"https:\/\/impresion3d.website\/wp-content\/uploads\/2023\/10\/LOGO-IMPRESION3D.WEBSITE-BOLD.png"},"description":"I dream of a better world, healthier where we are all free. I like to learn, blogging, and the impression of 3D. I hope with this Blog to be able to make a contribution to the community and grow together with you in this beautiful world of 3D printing.","sameAs":["http:\/\/impresion3d.website"],"url":"https:\/\/impresion3d.website\/en\/author\/cvenencia\/"}]}},"_links":{"self":[{"href":"https:\/\/impresion3d.website\/en\/wp-json\/wp\/v2\/posts\/656","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/impresion3d.website\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/impresion3d.website\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/impresion3d.website\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/impresion3d.website\/en\/wp-json\/wp\/v2\/comments?post=656"}],"version-history":[{"count":0,"href":"https:\/\/impresion3d.website\/en\/wp-json\/wp\/v2\/posts\/656\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/impresion3d.website\/en\/wp-json\/wp\/v2\/media\/672"}],"wp:attachment":[{"href":"https:\/\/impresion3d.website\/en\/wp-json\/wp\/v2\/media?parent=656"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/impresion3d.website\/en\/wp-json\/wp\/v2\/categories?post=656"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/impresion3d.website\/en\/wp-json\/wp\/v2\/tags?post=656"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}