{"id":796,"date":"2022-10-28T06:00:00","date_gmt":"2022-10-28T09:00:00","guid":{"rendered":"https:\/\/impresion3d.website\/?p=796"},"modified":"2023-08-31T20:08:04","modified_gmt":"2023-08-31T23:08:04","slug":"speed-settings-heal-in-spanish","status":"publish","type":"post","link":"https:\/\/impresion3d.website\/en\/speed-settings-heal-in-spanish\/","title":{"rendered":"Speed settings, Cura in Spanish."},"content":{"rendered":"<h2 class=\"wp-block-heading\">print speed<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>This setting defines the speed at which the model will be printed in mm\/s<\/strong>.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">With a high speed the printing times will be less. With increasing speed you may also need to increase the temperature, to ensure the filament will extrude correctly.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">If you are just starting out, try not to print at high speeds as you may have layer shifting issues.<\/p>\n\n\n\n<p class=\"has-background wp-block-paragraph\" style=\"background-color:#d5e8f070\"><strong>Recommendation<\/strong>: Set a speed between 50 and 60mm\/s for most of your prints.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>fill speed<\/strong>: This value will indicate the speed at which the fill material has to be printed.&nbsp;<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">A higher speed can be used for filling to reduce print times. You just have to keep in mind that excessive speed can cause problems, or even affect the hardness of the printed model.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Outer Wall Speed:<\/strong>&nbsp;&nbsp;Speeds at which exterior walls are printed.&nbsp;<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Printing the outer wall a little slower usually results in a better finish.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Inner Wall Speed:<\/strong>&nbsp;&nbsp;Speeds at which all interior walls are printed. <\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Printing the interior walls faster than the exterior ones reduces print times. Adjusting this value between the speed of the outer wall and the speed of infill can work well.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Upper \/ lower speed:<\/strong>&nbsp;Speeds at which the top and bottom layers will print. A lower speed increases the quality of the seam in the upper layers.<\/li>\n<\/ul>\n\n\n\n<ul class=\"wp-block-list\">\n<li>&nbsp;<strong>Lining top surface speed<\/strong>&nbsp;<strong>:<\/strong>&nbsp;Speeds at which the top surface layers of the liner are printed.<\/li>\n<\/ul>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Support Fill Rate:<\/strong>&nbsp;&nbsp;Corresponds to the speed at which the support will be printed. The quality of the support doesn&#039;t matter much, so the speed can be increased a bit at this point.<\/li>\n<\/ul>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Support interface speed:<\/strong>&nbsp;&nbsp;Speed at which the tops and bottoms of the support are printed. Since they have to adhere to the model, printing at a slower speed is recommended.<\/li>\n<\/ul>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"800\" height=\"445\" src=\"https:\/\/impresion3d.website\/wp-content\/uploads\/2022\/10\/Ajustes-de-velocidad-ultimaker-cura-velocidades-de-impresion.webp\" alt=\"print speed\" class=\"wp-image-2791\"\/><figcaption class=\"wp-element-caption\">This image visualizes the different print speeds<\/figcaption><\/figure>\n<\/div>\n\n\n<p class=\"has-background wp-block-paragraph\" style=\"background-color:#d5e8f070\"><strong>Recommendation<\/strong>: When choosing a general print speed, Cura will automatically set the values for the interior and exterior walls. You can use these presets as a starting point and experiment as you go.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Velocity of displacement<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>It is the speed at which the nozzle moves from one point to another, when it is not printing walls or fills.<\/strong>&nbsp;<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Traveling at high speeds decreases the chance of filament oozing out of the nozzle, resulting in a cleaner object.&nbsp;<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Too high a travel speed can cause the nozzle to hit a printed part, which can cause damage from the hot nozzle. This can be prevented by using the Z-hop feature.<\/p>\n\n\n\n<p class=\"has-background wp-block-paragraph\" style=\"background-color:#d5e8f070\"><strong>Recommendation<\/strong>: The default scroll speed for all Cura profiles is 150.0 mm\/s<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Initial layer speed<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>This setting is used to specify the speed of the first layer<\/strong>.&nbsp;<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">This is one of the most important parameters of all printing, since too high a speed can impair the adhesion of the first layer, causing your model to come off the heated bed.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">One of the most common problems is the lack of adhesion of the filament to the hot bed, a problem that is also reflected in the detachment of the models in the middle of the print.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">One of the ways to ensure the adhesion of the filament to the hot bed (among many others), is to use a VERY low speed for the first layer.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Using very low speeds to print the first layer is one of the first steps to ensure the success of your future prints.<\/p>\n\n\n\n<p class=\"has-background wp-block-paragraph\" style=\"background-color:#d5e8f070\"><strong>Recommendation<\/strong>: Use a speed of 20.0 mm\/s to print the first layer<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Skirt\/edge speed<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">The speed at which the skirt or borders are printed is just as important as the initial layer. Especially when it comes to the edges, which are going to help with the adhesion of the filament to the hot bed.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Although the Skirt is not part of the print itself, it has a very important function (besides extruding missing filament by dripping) and that is to let you know the following:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>If the lines of the Skirt won&#039;t stick on the bed, neither will the first layer of your print.<\/li>\n\n\n\n<li>If the lines of the Skirt do not stick together, it means that your heated bed is not level.<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Like the skirt, the edges are very important as they will help avoid warping or lifting issues in the corners. These lines will also receive the same importance as those of the first layer.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>If when printing the edges the lines do not stick to each other, it means that your bed is not well leveled.<\/li>\n\n\n\n<li>If the border lines won&#039;t stick to the bed, neither will the first layer of your print.<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">See more about: \u00ab<a href=\"https:\/\/impresion3d.website\/en\/skirt-edge-or-raft-which-to-use\/\">Skirt edge or raft, which one to use in Cura?<\/a>\u00ab<\/p>\n\n\n\n<p class=\"has-background wp-block-paragraph\" style=\"background-color:#d5e8f070\"><strong>Recommendation<\/strong>: For Skirt and Edges use the same speed as the first layer: 20.0 mm\/s<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Number of slower layers<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>This setting defines the number of layers that will print slower<\/strong>. The speed will be applied to the number of layers you specify.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A high number implies printing multiple layers at a slow speed. This can lower the possibility of deformations, but increase printing times considerably.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><a href=\"https:\/\/support.ultimaker.com\/hc\/article_attachments\/360009966439\/Number-of-slower-layers.png\"><\/a>For example, the number of slowest layers is set to 4, which means that after the fourth layer the normal print speed will be used.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Match filament flow<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">This setting allows fine lines to be printed faster than normal, so the amount of material oozing per second does not change.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Thin parts of the model may need to be printed with a smaller line width than defined in the settings. This setting controls the speed changes of those lines.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Activate throttle control<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Acceleration is a very important part of printing. It lowers the set speeds and makes it a bit slower, but more accurate.&nbsp;<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Disable the setting for maximum throttle.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Activate boost control<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Determines the speed of the print head before coming to a hard stop. The print head should come to a complete stop at some points.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The jerk setting lowers the set speeds and which makes printing a bit slower, but more accurate.&nbsp;<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Turn the setting off for maximum boost.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">I invite you to read: <strong><a href=\"https:\/\/impresion3d.website\/en\/best-cura-settings-for-beginners\/\">the best Cura setups for beginners<\/a><\/strong>\u00a0either\u00a0<a href=\"https:\/\/impresion3d.website\/en\/flow-2\/\"><strong>How to calibrate the Flow to obtain more accurate impressions<\/strong><\/a>.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">If you have any idea or contribution you can leave it in the comments.<\/p>","protected":false},"excerpt":{"rendered":"<p>Print speed This setting defines the speed at which the model is to be printed in mm\/s. With a high speed the printing times...<\/p>","protected":false},"author":1,"featured_media":798,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[39],"tags":[],"class_list":["post-796","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-ultimaker-cura",""],"gutentor_comment":0,"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v27.4 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>Impresion3d.website<\/title>\n<meta name=\"description\" content=\"La velocidad de impresi\u00f3n define la velocidad (en mm \/ s) a la que se mueve el cabezal de impresi\u00f3n durante la impresi\u00f3n.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/impresion3d.website\/en\/speed-settings-heal-in-spanish\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Configuraciones de velocidad, Cura en espa\u00f1ol. -\" \/>\n<meta property=\"og:description\" content=\"La velocidad de impresi\u00f3n define la velocidad (en mm \/ s) a la que se mueve el cabezal de impresi\u00f3n durante la impresi\u00f3n.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/impresion3d.website\/en\/speed-settings-heal-in-spanish\/\" \/>\n<meta property=\"og:site_name\" content=\"Impresion3d.website\" \/>\n<meta property=\"article:published_time\" content=\"2022-10-28T09:00:00+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2023-08-31T23:08:04+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/impresion3d.website\/wp-content\/uploads\/2021\/09\/Ajustes-de-velocidad-en-cura-Impresion-3d.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"800\" \/>\n\t<meta property=\"og:image:height\" content=\"446\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"Dar\u00edo\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Dar\u00edo\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"5 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/impresion3d.website\\\/configuraciones-de-velocidad-cura-en-espanol\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/impresion3d.website\\\/configuraciones-de-velocidad-cura-en-espanol\\\/\"},\"author\":{\"name\":\"Dar\u00edo\",\"@id\":\"https:\\\/\\\/impresion3d.website\\\/#\\\/schema\\\/person\\\/86832f5d1e89f7083a5cda59007d703e\"},\"headline\":\"Configuraciones de velocidad, Cura en espa\u00f1ol.\",\"datePublished\":\"2022-10-28T09:00:00+00:00\",\"dateModified\":\"2023-08-31T23:08:04+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/impresion3d.website\\\/configuraciones-de-velocidad-cura-en-espanol\\\/\"},\"wordCount\":1212,\"commentCount\":1,\"publisher\":{\"@id\":\"https:\\\/\\\/impresion3d.website\\\/#\\\/schema\\\/person\\\/86832f5d1e89f7083a5cda59007d703e\"},\"image\":{\"@id\":\"https:\\\/\\\/impresion3d.website\\\/configuraciones-de-velocidad-cura-en-espanol\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/impresion3d.website\\\/wp-content\\\/uploads\\\/2021\\\/09\\\/Ajustes-de-velocidad-en-cura-Impresion-3d.jpg\",\"articleSection\":[\"Ultimaker Cura\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/impresion3d.website\\\/configuraciones-de-velocidad-cura-en-espanol\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/impresion3d.website\\\/configuraciones-de-velocidad-cura-en-espanol\\\/\",\"url\":\"https:\\\/\\\/impresion3d.website\\\/configuraciones-de-velocidad-cura-en-espanol\\\/\",\"name\":\"Configuraciones de velocidad, Cura en espa\u00f1ol. -\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/impresion3d.website\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/impresion3d.website\\\/configuraciones-de-velocidad-cura-en-espanol\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/impresion3d.website\\\/configuraciones-de-velocidad-cura-en-espanol\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/impresion3d.website\\\/wp-content\\\/uploads\\\/2021\\\/09\\\/Ajustes-de-velocidad-en-cura-Impresion-3d.jpg\",\"datePublished\":\"2022-10-28T09:00:00+00:00\",\"dateModified\":\"2023-08-31T23:08:04+00:00\",\"description\":\"La velocidad de impresi\u00f3n define la velocidad (en mm \\\/ s) a la que se mueve el cabezal de impresi\u00f3n durante la impresi\u00f3n.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/impresion3d.website\\\/configuraciones-de-velocidad-cura-en-espanol\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/impresion3d.website\\\/configuraciones-de-velocidad-cura-en-espanol\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/impresion3d.website\\\/configuraciones-de-velocidad-cura-en-espanol\\\/#primaryimage\",\"url\":\"https:\\\/\\\/impresion3d.website\\\/wp-content\\\/uploads\\\/2021\\\/09\\\/Ajustes-de-velocidad-en-cura-Impresion-3d.jpg\",\"contentUrl\":\"https:\\\/\\\/impresion3d.website\\\/wp-content\\\/uploads\\\/2021\\\/09\\\/Ajustes-de-velocidad-en-cura-Impresion-3d.jpg\",\"width\":800,\"height\":446,\"caption\":\"Ajustes de velocidad en cura Impresion 3d\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/impresion3d.website\\\/configuraciones-de-velocidad-cura-en-espanol\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Portada\",\"item\":\"https:\\\/\\\/impresion3d.website\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Configuraciones de velocidad, Cura en espa\u00f1ol.\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/impresion3d.website\\\/#website\",\"url\":\"https:\\\/\\\/impresion3d.website\\\/\",\"name\":\"Impresion3d.website\",\"description\":\"Tu comunidad de Impresi\u00f3n 3D\",\"publisher\":{\"@id\":\"https:\\\/\\\/impresion3d.website\\\/#\\\/schema\\\/person\\\/86832f5d1e89f7083a5cda59007d703e\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/impresion3d.website\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":[\"Person\",\"Organization\"],\"@id\":\"https:\\\/\\\/impresion3d.website\\\/#\\\/schema\\\/person\\\/86832f5d1e89f7083a5cda59007d703e\",\"name\":\"Dar\u00edo\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/impresion3d.website\\\/wp-content\\\/uploads\\\/2023\\\/10\\\/LOGO-IMPRESION3D.WEBSITE-BOLD.png\",\"url\":\"https:\\\/\\\/impresion3d.website\\\/wp-content\\\/uploads\\\/2023\\\/10\\\/LOGO-IMPRESION3D.WEBSITE-BOLD.png\",\"contentUrl\":\"https:\\\/\\\/impresion3d.website\\\/wp-content\\\/uploads\\\/2023\\\/10\\\/LOGO-IMPRESION3D.WEBSITE-BOLD.png\",\"width\":400,\"height\":146,\"caption\":\"Dar\u00edo\"},\"logo\":{\"@id\":\"https:\\\/\\\/impresion3d.website\\\/wp-content\\\/uploads\\\/2023\\\/10\\\/LOGO-IMPRESION3D.WEBSITE-BOLD.png\"},\"description\":\"Sue\u00f1o con un mundo mejor, m\u00e1s sano donde todos seamos libres. Me gusta aprender, el blogging y la impresion 3D. Espero con este Blog poder hacer un aporte a la comunidad y crecer junto a ustedes en este hermoso mundo de la impresi\u00f3n 3D.\",\"sameAs\":[\"http:\\\/\\\/impresion3d.website\"],\"url\":\"https:\\\/\\\/impresion3d.website\\\/en\\\/author\\\/cvenencia\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Impresion3d.website","description":"The print speed defines the speed (in mm\/s) at which the print head moves during printing.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/impresion3d.website\/en\/speed-settings-heal-in-spanish\/","og_locale":"en_US","og_type":"article","og_title":"Configuraciones de velocidad, Cura en espa\u00f1ol. -","og_description":"La velocidad de impresi\u00f3n define la velocidad (en mm \/ s) a la que se mueve el cabezal de impresi\u00f3n durante la impresi\u00f3n.","og_url":"https:\/\/impresion3d.website\/en\/speed-settings-heal-in-spanish\/","og_site_name":"Impresion3d.website","article_published_time":"2022-10-28T09:00:00+00:00","article_modified_time":"2023-08-31T23:08:04+00:00","og_image":[{"width":800,"height":446,"url":"https:\/\/impresion3d.website\/wp-content\/uploads\/2021\/09\/Ajustes-de-velocidad-en-cura-Impresion-3d.jpg","type":"image\/jpeg"}],"author":"Dar\u00edo","twitter_card":"summary_large_image","twitter_misc":{"Written by":"Dar\u00edo","Est. reading time":"5 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/impresion3d.website\/configuraciones-de-velocidad-cura-en-espanol\/#article","isPartOf":{"@id":"https:\/\/impresion3d.website\/configuraciones-de-velocidad-cura-en-espanol\/"},"author":{"name":"Dar\u00edo","@id":"https:\/\/impresion3d.website\/#\/schema\/person\/86832f5d1e89f7083a5cda59007d703e"},"headline":"Configuraciones de velocidad, Cura en espa\u00f1ol.","datePublished":"2022-10-28T09:00:00+00:00","dateModified":"2023-08-31T23:08:04+00:00","mainEntityOfPage":{"@id":"https:\/\/impresion3d.website\/configuraciones-de-velocidad-cura-en-espanol\/"},"wordCount":1212,"commentCount":1,"publisher":{"@id":"https:\/\/impresion3d.website\/#\/schema\/person\/86832f5d1e89f7083a5cda59007d703e"},"image":{"@id":"https:\/\/impresion3d.website\/configuraciones-de-velocidad-cura-en-espanol\/#primaryimage"},"thumbnailUrl":"https:\/\/impresion3d.website\/wp-content\/uploads\/2021\/09\/Ajustes-de-velocidad-en-cura-Impresion-3d.jpg","articleSection":["Ultimaker Cura"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/impresion3d.website\/configuraciones-de-velocidad-cura-en-espanol\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/impresion3d.website\/configuraciones-de-velocidad-cura-en-espanol\/","url":"https:\/\/impresion3d.website\/configuraciones-de-velocidad-cura-en-espanol\/","name":"Speed settings, Cura in Spanish. -","isPartOf":{"@id":"https:\/\/impresion3d.website\/#website"},"primaryImageOfPage":{"@id":"https:\/\/impresion3d.website\/configuraciones-de-velocidad-cura-en-espanol\/#primaryimage"},"image":{"@id":"https:\/\/impresion3d.website\/configuraciones-de-velocidad-cura-en-espanol\/#primaryimage"},"thumbnailUrl":"https:\/\/impresion3d.website\/wp-content\/uploads\/2021\/09\/Ajustes-de-velocidad-en-cura-Impresion-3d.jpg","datePublished":"2022-10-28T09:00:00+00:00","dateModified":"2023-08-31T23:08:04+00:00","description":"The print speed defines the speed (in mm\/s) at which the print head moves during printing.","breadcrumb":{"@id":"https:\/\/impresion3d.website\/configuraciones-de-velocidad-cura-en-espanol\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/impresion3d.website\/configuraciones-de-velocidad-cura-en-espanol\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/impresion3d.website\/configuraciones-de-velocidad-cura-en-espanol\/#primaryimage","url":"https:\/\/impresion3d.website\/wp-content\/uploads\/2021\/09\/Ajustes-de-velocidad-en-cura-Impresion-3d.jpg","contentUrl":"https:\/\/impresion3d.website\/wp-content\/uploads\/2021\/09\/Ajustes-de-velocidad-en-cura-Impresion-3d.jpg","width":800,"height":446,"caption":"Ajustes de velocidad en cura Impresion 3d"},{"@type":"BreadcrumbList","@id":"https:\/\/impresion3d.website\/configuraciones-de-velocidad-cura-en-espanol\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Portada","item":"https:\/\/impresion3d.website\/"},{"@type":"ListItem","position":2,"name":"Configuraciones de velocidad, Cura en espa\u00f1ol."}]},{"@type":"WebSite","@id":"https:\/\/impresion3d.website\/#website","url":"https:\/\/impresion3d.website\/","name":"Impresion3d.website","description":"Your 3D Printing Community","publisher":{"@id":"https:\/\/impresion3d.website\/#\/schema\/person\/86832f5d1e89f7083a5cda59007d703e"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/impresion3d.website\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":["Person","Organization"],"@id":"https:\/\/impresion3d.website\/#\/schema\/person\/86832f5d1e89f7083a5cda59007d703e","name":"Dario","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/impresion3d.website\/wp-content\/uploads\/2023\/10\/LOGO-IMPRESION3D.WEBSITE-BOLD.png","url":"https:\/\/impresion3d.website\/wp-content\/uploads\/2023\/10\/LOGO-IMPRESION3D.WEBSITE-BOLD.png","contentUrl":"https:\/\/impresion3d.website\/wp-content\/uploads\/2023\/10\/LOGO-IMPRESION3D.WEBSITE-BOLD.png","width":400,"height":146,"caption":"Dar\u00edo"},"logo":{"@id":"https:\/\/impresion3d.website\/wp-content\/uploads\/2023\/10\/LOGO-IMPRESION3D.WEBSITE-BOLD.png"},"description":"I dream of a better world, healthier where we are all free. I like to learn, blogging, and the impression of 3D. I hope with this Blog to be able to make a contribution to the community and grow together with you in this beautiful world of 3D printing.","sameAs":["http:\/\/impresion3d.website"],"url":"https:\/\/impresion3d.website\/en\/author\/cvenencia\/"}]}},"_links":{"self":[{"href":"https:\/\/impresion3d.website\/en\/wp-json\/wp\/v2\/posts\/796","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/impresion3d.website\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/impresion3d.website\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/impresion3d.website\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/impresion3d.website\/en\/wp-json\/wp\/v2\/comments?post=796"}],"version-history":[{"count":0,"href":"https:\/\/impresion3d.website\/en\/wp-json\/wp\/v2\/posts\/796\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/impresion3d.website\/en\/wp-json\/wp\/v2\/media\/798"}],"wp:attachment":[{"href":"https:\/\/impresion3d.website\/en\/wp-json\/wp\/v2\/media?parent=796"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/impresion3d.website\/en\/wp-json\/wp\/v2\/categories?post=796"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/impresion3d.website\/en\/wp-json\/wp\/v2\/tags?post=796"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}