As storing the filaments of 3D printing
Storing 3D printing filaments is key to maintaining their quality and avoiding problems during the printing process. The best way to store them is to…
How to add a printer in PrusaSlicer
To add a printer in PrusaSlicer you need to go to the “Printer Settings” tab, open the “System Settings” window of the printer…
PrusaSlicer: The laminator from Prusa Research
PrusaSlicer is an open source software for preparing 3D models for 3D printing. It is best known for being the software used to prepare 3D models for 3D printing.
How to print a QR code in 3D
To print a QR code in 3D you need to use an online application such as Autodesk’s Tinkercad. In the basic shapes menu…
How to make keychains with names in 3D
A fantastic idea for printing personalized keychains is 3D keychains with names. Although it may not seem like it, it is something easy to do and according to…
Threads in 3D printing (and how to avoid them)
Searching for information on how to remove threads in 3D printing, I found that they only talked about retraction distances and filament temperatures,…
Skirt Edge or Balsa What to use in Cure?
Skirt Edge or Raft are Cura settings that determine the type of adhesion to the printing plate. Their correct use is vital…
Spiralize the outer contour – Cura’s “Vase mode”
One of the special modes in Cura is “spiralize the outer contour” which is also known as “Vase mode” and is used…
How to clean the nozzle of the 3D printer (All options).
The nozzle of the 3D printer usually accumulates a large amount of plastic that, if not cleaned, burns over time…
How to activate and configure smoothing in Cura
Anti-aliasing is a setting in Cura settings that allows you to obtain smooth surfaces on the top layers of the printed model. Enabling this setting will allow you to achieve a smooth surface…