What grease to use in 3D printers?
The best grease for use in 3D printers is Teflon grease, or synthetic grease with PTFE. These greases lubricate and are resistant to...
Month: February 2022
Cura Support configurations
When it comes to printing complex 3D models, supports are an essential part of the process. In Ultimaker Cura, you can customize and adjust a wide range of support…
Cooling Settings in Cura
The cooling settings in Cura allow you to enable the layer fans during printing, these ensure that the material is properly cooled before printing....
How to print in two colors with a single extruder – Cura Ultimaker
Using a laminating software like Cura Ultimaker you will be able to modify the GCode file so that at the right time, you can manually change the filament. In this way...
How to make a keychain Spotify for 3D printing in Tinkercad
Spotify es una aplicación de Android, Windows y otras plataformas, que brinda un servicio de música digital vía streaming. Esta aplicación te permite copiar y…
How to do maintenance to a 3D printer: a complete Guide
Maintenance of a 3D printer is essential for it to work efficiently, reliably and safely. Today I am going to show you a series of tips…
How to change the size of the nozzle in Cura
To change the size of the nozzle in Cura you must go to the top menu, where the type of filament you are using is listed and click on the...